| PART |
Description |
Maker |
| JYC0128 |
miniature chip type designed for two-way surface mounting
|
IDEA.lnc.
|
| JYOC0195 |
miniature chip type designed for surface mounting
|
IDEA.lnc.
|
| ISOC0128 |
miniature chip type designed for two-way surface mounting
|
IDEA.lnc.
|
| JYBC0118 |
miniature chip type designed for surface mounting and measure approximately 2.5 x 3 mm
|
IDEA.lnc.
|
| JYOBC0118 |
miniature chip type designed for surface mounting and measure approximately 2.5 x 3 mm
|
IDEA.lnc.
|
| JGC0175 |
miniature lens type designed for surface mounting
|
IDEA.lnc.
|
| M50753-PGYS |
Piggyback
The M50753-PGYS is an EPROM mounted-type microcomputer employing a silicon gate CMOS process and was designed for developing programs for single-chip 在M50753 - PGYS是存储器安装型微机采用硅栅CMOS工艺，并负责制定项目设计的单芯片
|
Mitsubishi Electric, Corp.
Mitsubishi Electric Corporation
Mitsubishi Electric Semiconductor
|
| 12BH7-A |
The 12BH7-A is a miniature medium-mu twin troide designed primarily for use as a vertical-deflection amplifier in television receivers 2BH7 - A是小型中型亩troide主要是纵向，在电视接收器偏转放大器的使用而设
From old datasheet system
|
GE Security, Inc.
GE[General Semiconductor]
|
| MAL-C065R |
Striped type light source designed for a variety of applications
|
Unity Opto Technology
|
| C16005 |
Asymmetric IESNA Type I (short) beam designed for tilted poles
|
Ledil, Inc.
|
| MNR12 |
Resistors > Multiple miniature chip resistor networks Size0603(0201) rectangular chip resistors : MNR14, etc.
|
ROHM
|
